I'm getting this error code and what does it mean? - Champ - Forums for Shopify

Forums
I'm getting this error code and what does it mean?

Latest Topics

Vogelzang 5770

I'm having a e2 code come up. I've have replaced the motherboard both limit switches ,exhaust fa...

5
harman p61 will not shut down

my harman p61 runs fine but it will not shut down. I had the tech out and he shook his head and s...

2
I am getting error code 3 POF Breckwell 5520

I am getting error code 3 POF Breckwell 5520. I have replaced the POF Thermodisc already. I beli...

2
Ashley 5660L gives E1 code after 30 seconds of turn on?

I checked the pressure hose and its not cracked.

2
I'm getting a number two error on my pellet stove.

My stove isn't running. It shuts down and the number two heat level light won't stop flashing. Wh...

5
st croix hastings fault

I have a hastings pellet stove, i have a solid light on number 1 and blinking on number 5 on the ...

2
Whifield Controller Leds Flashing

I have a Traditions/Lennox stove. Tested n/c pressure switch and n/c high limit switch which are ...

2
5660 pellet stove

Error 1 and 5 blinking

2
2009 Harman Accentra 6 blink

Stove runs for an hour, then shuts down with 6 blinks, I’ve gone through the manual and checked e...

2
E2 error when it's lighting (repost w an acc)

Was working fine until an auger jam, which I fixed and vacuumed out (also cleaned the stove entir...

7
E2 error when it's lighting

Was working fine until an auger jam, which I fixed and vacuumed out (also cleaned the stove entir...

2
Error code E1

Im getting E1 code

2
pellet furnace error code.

My Fahernheit pellet furnace will start.. When the igniter turns off i get a reading on my contr...

2