I just installed a new Golden Eagle Model 5520 Pellet Stove. Everything seems to work properly except the air blowing out of the fan is barely lukewarm. I have checked everything and can't seem to find anything that would indicate a problem. This stove is supposed to heat up to 2200 sqft and as it is, I'm not thinking it would heat 100 sqft at this point.
Thanks in advance for any help or information.
Hi! I had some troubles with posting this as a separate topic, but I hope you can help me.
We have a Napoleon Timberwolf insert pellet stove (it's here for specs https://wisepick.org/best-pellet-stove/). Every time we push the power button the light on that button will turn on and there is a click sound but nothing else happens and the stove won't turn on. We have cleaned everything inside and out. We have also checked every part that could have a problem and have found nothing. It could be the control panel but we don't want to spend the money on a new one until we are absolutely sure that's the problem. Any ideas what could be causing this? Control panel or something else? We did get a lot of water coming down our chimney in the last 6 months but the stove has worked since then.
Hi Hannah
It does sound like your control panel is bad and we have them here
https://www.eastcoasthearth.com/search?q=napoleon+control+panel
Usually to be sure, I put my AC test cord on the other motorized components to test them and my mult-meter on the snap discs and air bleeder on the vacuum switch to test it's bladder.