Hello. I have a Harman Invincible RS and I would like to update it to be an autolight stove. It has the three knob control panel. Do you know what parts I need?
Hello. Here's a list of suggested parts to convert a Harman Invincible RS to Autolight. If you drill your own hole in the circuit board face place for the igniter toggle switch, then you can use your existing faceplate.
I've also included a video showing the stove after the parts have been installed and updated.
Harman Wire Harness - Most Models
https://www.eastcoasthearth.com/products/harman-wire-harness-3-20-08727?_pos=1&_sid=2ead32b3e&_ss=r
Harman OEM 4 Output Circuit Board
https://www.eastcoasthearth.com/products/harman-oem-4-output-circuit-board-comes-w-3-knobs-and-3-knob-shafts-1-00-05886?_pos=5&_sid=dba18fa91&_ss=r
Harman P61A P43 P68 Circuit Board Face Plate
https://www.eastcoasthearth.com/products/harman-p43-p61a-p68-circuit-board-face-plate-1-10-08327?_pos=1&_sid=dba18fa91&_ss=r
P61a or P61 - Burn Pot - Harman
https://www.eastcoasthearth.com/products/p68-burn-pot-harman-1-10-06723?_pos=1&_sid=576d9e826&_ss=r
Harman Igniter Holder Cradle
https://www.eastcoasthearth.com/products/igniter-holder-cradle?_pos=1&_sid=d7b336111&_ss=r