Visit Our East Coast Hearth Parts Store
Pellet Stove Q & A Home
My Account
Login
Register
Forums
How do I replace this part?
Latest Topics
Create topic
Sort: Oldest topic
Most recent activity
Newest topic
Oldest topic
Most viewed
Least viewed
Sherwood stove FS model
Sherwood stove FS model One wire on my auger motor is hooked to my circuitboard and one is unhook...
2
model pu cb240-06
how do i remove auger motor
2
Ashpan gasket Astoria pellet stove
This has no diagram on how to replace it.most of it gone.a picture would be nice.Thank you bill
2
Need some direction for heating problem
I just installed a new Golden Eagle Model 5520 Pellet Stove. Everything seems to work properly e...
7
PDVC25 control board
I need the black touch pad. I had the board tested, It works but the pad is bad.
2
Englander Pellet Stove Question
Bought a 2014 Englander 25 PDV pellet stove (knowing it worked but didn't feed pellets). Took be...
2
USSC 5660 firebrick
I need to replace the 3 pieces of firebrick on my USSC 5660. The center piece is much thinner th...
2
Cheap Charlie HCF120 Gasket Replacement
We have a Cheap Charlie HCF120 that came with the house we just bought. We are trying to get it r...
2
How do I know if I have the right replacement auger?
I have a Waterford Pellet Stove and the auger motor went out I bought a auger motor 1rpm clock wi...
2
Spade terminals
The spade terminals on the wires connecting to the proof of fire sensor are charred and look slig...
2
Converting a Harman Invincible RS to Autolight
Hello. I have a Harman Invincible RS and I would like to update it to be an autolight stove. It h...
2
Santa fe B Fuse Holder
Hi, think my fuse holder is bad or loose. How do I replace it. Thanks
2
Changing connectors from Molex to Spade
I bought a new Combustion motor for an older model pellet stove HHPP2BD Pelpro Stove. The part is...
2
Quadra fire 1200i convection blower
I bought the aftermarket blower and once received, the whole thing is backwards. I can't even fi...
2
how to replace a igniter .
i have a st croix hasting pellet stove. the igniter doesnt get hot enough. i would like tov know ...
2
How do I replace the HU5S thermal fuse on my combustion motor for a Harman Accentra-2 pellet stove
I have several thermal fuses (HU5X) that came with my instruction/service manual. My stove just u...
3
Quadra Fire Won't Ignite
I have a Quadra Fire 1200i. Had to replace the control box because it bumped and shorted out. Wit...
2
Create topic