Vacuum Switch- Pelpro/Glowboy/Cheap/Charlie- Replaces KS-5090-1300 #GRA4XB70#

This metal vacuum switch fits all Pelpro/Glowboy/Cheap Charlie pellet stoves. Replaces KS-5090-1300. Note: The mounting may differ for the switch that comes with your stove. You may have to drill new holes to mount this vacuum switch.

Pressure adjustment range from 0.12 to 5.0 WC should be set to .15 for most pellet stoves so use the lowest setting on this switch.

The vacuum  switch is a safety switch that shuts the pellet stove down if the combustion (Exhaust) blower fails. If your pellet stove starts up then stops feeding pellets after the start cycle is over, then the vacuum switch is bad or the vacuum line is clogged with ash.  Also, if the auger motor does not turn you may have a bad vacuum switch.

  • Home Heater
  • Home Heater 120 (HHPP2BD)
  • Home Heater 300 (HHPP32BD)
  • Shop Heater
  • Shop Heater 120
  • Shop Heater 300
  • FBG Step Top
  • FGB Bay View
  • IGB Bay View
  • Classic Insert
  • Standard Freestanding PP60
  • Standard Freestanding FPP2BD
  • Step Top FPPST4BD
  • Bay Window Freestanding FPPBW2GD
  • Bay Window Insert IPPBW2GD
  • Shepard Bay
  • Chinook
  • CC Edison Jr.(HCJ)
  • CC Edison Sr. (HCS)
  • CC Franklin300 (HCF 300)
  • CC Franklin120 (HCF 120)

Most newer stoves use the open terminal and common terminal for the electrical connectors and negative vacuum port. This means the exhaust fan is after the burn pot and connects to the venting and the switch is open until the negative pressure is applied.

Negative Pressure Hookup

Clip wires to farthest terminals from knob. Connect hose to low port. For the following pellet stoves.

  • Magnum & Country Flame
  • U.S. Stove
  • Pelpro/Glowboy
  • Englander
  • Breckwell
  • Napoleon
  • Enviro
  • Piazetta
  • Archguard
  • Quadrafire
  • Kozy
  • St Croix
  • Osburn/Enerzone
  • Lopi/ Avalon

Positive Pressure Hookup

Clip wires to outer terminals. Connect hose to Hi port (Bottom port). For the following pellet stoves.

  • Whitfield