my stove is not feeding pellets. i replaced convection fan cause it went. replaced augar motor
and replaced control board. the auger is not turning, i hear it but that it. i just replaced the hopper switch. no blinking lights. any ideas
Hello Kim,
It could still be that the hopper lid isn't pushing the hopper switch all the way. Try bypassing the hopper lid switch to see if that fixes it.
Do you try disconnecting the 2 red wires connect to the hopper lid switch and plug them into each other?
Sometimes the hopper lid gasket can prevent the hopper lid from closing down on the hopper lid switch enough to close it.
