My AP5660PE fuse always blows 8 minutes after powering on. I used a clamp meter to test the amp of devices. Igniter : 2.5A; auger motor: 2A; exhaust blower: 4.7A,
room blower: 0.8A . I disconnected room blower and kept other running, 8 mins blow again. I disconnected igniter & auger motor & room blower and left combustion blowed ON
only, No blow, lasting 30mins. Could any expert tell me which is the root reason for short-circuit ? Thanks in advance ! Max
US stove AP5660PE fuse alway blows 8 minutes after powering on
-
-
Hi Max
Please look over this in depth troubleshooting blog on that issue I wrote and try those steps. Let me know if you have any questions
https://www.eastcoasthearth.com/blogs/pellet-stove-control-panels/procedure-to-diagnose-issue-when-your-control-panel-fuse-blows?_pos=1&_sid=f76dddb9b&_ss=r