My Pacific Energy Warmland normally has 2 blower speeds.- a slower one at lower temperatures and a faster one when its really hot.
The faster one is no longer coming on. My guess is its a temp sensor but I'm wondering if it could be the circuit board? Assuming the temp sensor is the more likely repair, where exactly is it?
Any thoughts/suggestions most appreciated.
The Proof Of Fire POF temperature disc is located next to the exhaust blower. There is a picture of it in this troubleshoot guide. You can bypass this switch by pulling the wires off and connecting them together. Then see if the stove runs without it. Unplug the stove and make sure the wires do not touch the metal of the stove.
How old is your stove?
Checkout all the troubleshooting in the manual below
