Quadra Fire Santa Fe.......control box lights

Hello I changed the control box on the Santa Fe pellet stove and now all I get is a green blinking light how do I fix that thank you

Hello
There could be an issue with the T-Stat. Disconnect the T-Stat wires from the back of the stove and connect the 2 terminals together with a jumper wire or paper clip to bypass the T-Stat and see if the stove runs.

Blue lights flashing blue six times and then 4 times?

The flashing of the blue light 6 times means the control box is programmed for the Quadra-Fire Model Santa Fe FS or Santa Fe Insert or Castile Insert
It should blink 6 blinks every 10 seconds and then stop after 1 min.
Is your stove working, if not what does it not do?