2 RPM Heavy Duty Auger Motor- St Croix - CCW from rear- Replaces 80P20278R - 1 Male & 1 Female Clip + 2 more clips to extend wires- Back Ordered
High Quality 2 (S902) RPM auger motor for St Croix pellet stoves. Replaces 80P20278R. CCW from rear. 1 Male and 1 Female Clip. This motor is the highest quality gearbox motor made by Gleason-Avery with stall torque at 180 in lbs truly the workhorse of the line to help prevent auger jams compared to other common motors that are approx. 155 in lbs. Uses needle bearings. Longer lasting than ball bearings.
- Afton Bay
- Prescott EXL
- Prescott EXP
- The York
Note: 2 additional clips are included to squeeze onto the red wires for proper connection. These are AC motors so it does not matter which wire is which.
The auger motor turns the auger, which transfers the pellets from the hopper to the burn pot. It feeds the fire and keeps the flame going.
The auger motor must be replaced if it slows down or skips under a load (gears are stripped in the gear box when turning the auger.)
In older stove models the auger may stop when the stove gets hot. This may mean the auger motor needs replacing. Please consult a professional in your area to determine that this is the issue.
Numbers on some of the original auger motors with red leads. Model 45 5UP-075 115V S5416J RC12806