Englander PU-CBEP Control Panel & Circuit Board- 55-SHPEP/ 25-EP/ 25-EPI/ 55-SHPEPL/ 55-TRPEP- PU-CB19 Profile 2 ---MODEL/ MFG DATE/ PHONE REQUIRED--- SE36978
This is the Digital System Control Panel & Circuit Board (PU-CBEP) / (PU-CB19 Profile 2) for Evolution Pellet (25-EP, 25- EPI, 55-SHPEP, 55-SHPEPL, 55-TRPEP) Englander pellet stoves. It is used for adjusting the heat level to make it a higher or lower setting. There are 9 heat settings on an Englander board. It is also used to adjust the intensity of the room fan. If you want to heat a large house or large room, adjusting the heat and room fan to higher setting helps direct the heat throughout the space. If you want to heat a smaller house or a single room, lowering the fan or heat settings limits the heat to that area and conserves energy. This is also where the on and off buttons are located on the pellet stove.
Note: The mode is set to 2 and the lower 3 buttons are set to 1 1 1 and cannot be changed.
To program control board & process the order, the following is required. Please provide under "Add a note to your order" at checkout:
- Stove's model (Example: #55-SHPEPL)
- Manufacturing date
- Serial (Example: 003578) #
- Phone #
These can be found on a metal plate on the back of your stove.
For Englander control panels for other models see below:
Englander Control Panel PU-CB04 (after 2004)