Englander PU-CB98 Control Panel & Circuit Board-25-PDVC/ 25-PDV/ 25-PFS/ 55-SHP10 Pre2004- SE36986 ---MODEL/ MFG DATE/ PHONE REQUIRED---

This Digital System Englander PU-CB04-B (PU-CB98 replacement) Control Panel and Circuit Board is used for adjusting the heat level to make it a higher or lower setting. For older pellet stoves manufactured before 2004. This Control Panel is for Englander 25-PDVC and 25-PDV, 25-PDV, 25-PDVC, 55-SHP10 (L), American Standard, 55-TRP10, 25-PDVP, 55-SHP15, 55-SHP22 and 55-SHP22L, 55-TRP15, 55-TRP22, American Heritage, 25-PI, 55-SHP20, 55-TRP20, TRI-STAR 25-5670, US 25-5670, 25-PAF, 55-SHP25, 55-TRP25 TimberRidge & 25-PFS with 2 room blowers and will replace the old analog (knob) control panel and TimberRidge pellet stove models.

Note: You will receive is a PU-CB04-B, which is the direct replacement for the PU-CB98 and along with it, special instructions for hookup for proper operation

To program control board properly & process the order, the following is required. Please provide under "Add a note to your order" at checkout:

  • Stove's model (Example: 25-PDVC)
  • Manufacturing date
  • Serial# (Example: 003578) 
  • Phone #

These can be found on a metal plate on the back of your stove.

There are 9 heat settings on an Englander board. It is also used to adjust the intensity of the room fan. If you want to heat a large house or large room, adjusting the heat and room fan to higher setting helps direct the heat throughout the space. If you want to heat a smaller house or a single room, lowering the fan or heat settings limits the heat to that area and conserves energy. This is also where the on and off buttons are located on the pellet stove. 

These can be found on a metal plate on the back of your stove.

For an Englander control panel for stoves manufactured after 2004, see the link below:

Englander Control Panel PU-CB04

For 25-EP, 55-SHPEP, 55-SHPEPL, 55-TRPEP models see below:

Englander Control Panel PU-CBEP