Ignitor Element (Cartridge)- Pleasant Hearth - PH35 / PH50 - 300 Watt- 5 in- 2 male clips

Compatible with all Pleasant Hearth pellet stove years and models

 This 5" long ignitor does not have the original igniter collar. Just remove the collar from the old igniter with an allan wrench. If the collar is sticking after the set screw is removed then use a screw driver and hammmer to bang it off. Always unplug the unit before opening the back.
Then plug the 2 male clips into the stove wire harness.

Fits the following pleasant hearth models:

  • PH35
  • PH50