Leaf Blower 3 in Slip On Reducer for 3 in Pellet Pipe Exhaust Vent - 3 in AdjToRubberToPVC

Leaf Blower 4" Slip On Adapter Reducer fits tightly when cleaning your 3" pellet stove venting. Makes cleaning easier! Use it with with your leaf blower and vacuum attachment. The end will snugly fit any Selkirk or Duravent 3" diameter pellet stove venting to clean out ash.

See video demo - Click Here

This must be used with the Leaf Blower to 4" Pellet Pipe or DT adapter

Click here to order

Easy as 1-2-3 to install

1. Remove 3" termination Cap
2. Connect this reducer to 4" adapter above. Insert slip on end on to 3" Flue pipe.
3. Insert Leaf Blower Vacuum attachment into other end & tighten clamp!
Easy to use
1. Crack open pellet stove fire door to allow clean air to travel through stove and ash chambers for cleaning. Remove ash trap covers if they exist.
2. Install Leaf Blower with adapter and reducer into flue by removing the flue termination cap
3. Turn on leaf blower, rev up and set lock on. Have your helper hold this and assure ash is blowing out safely.
4. Brush inside of fire box and use a compressor to clear ash above heat exchanger tubes while ash is being safely blown outside!
--------------------------------------------
3" Leaf Blower Adapter
"pellet stove leaf blower adapter"