Whitfield 1 RPM Auger Motor- Replaces 120463- High Quality Extended Life with 2 male clips - CCW

Gleason-Avery 1 RPM High Quality Auger Motor GA Part # 901

(ball bearings for extended life)

This 1 RPM auger motor fits the Whitfield pellet stoves below. This motor is the highest quality gearbox motor made by Gleason-Avery with stall torque at 200 in lbs truly the workhorse of the line to help prevent auger jams compared to other common motors that are approx. 155 in lbs. Rugged, trouble-free. Our most popular gearbox motor based upon superior performance.

Whitfield Pellet Stoves: 1 RPM part # 120463

 Needs to be set for counter clockwise rotation looking from rear of stove.
 
  •  Advantage I (WP2)
  • Advantage II (WP2)
  • Advantage II-T (WP2)
  • Advantage III (WP2)
  • Advantage II-T Classic (WP2)
  • Advantage Plus (WP7)
  • Optima 2
  • Optima 3
  • Profile 20
  • Profile 30
  • Cascade (WP5)
  • Explorer
  • Frontiersman
  • T300P - (T301P, T305P, T308P) Whitfield Feed System
  • Legend (WP1)
  • Prodigy I (WP3)
  • Prodigy II (WP3)
  • Quest (WP4)
  • Quest Plus (WP4)
  • Waterford Erin
  • Renaissance

 The auger motor turns the auger, which transfers the pellets from the hopper to the burn pot. It feeds the fire and keeps the flame going. The auger motor must be replaced if it slows down or skips under a load (gears are stripped in the gear box when turning the auger.) See below for compatible models and specifications. In older stoves the auger may stop when the stove gets hot. This may mean the auger motor needs replacing. Please consult a professional in your area to determine that this is the issue.

115 Volts  SP/Open  .5 Amp  1 RPM

Continuous duty, Impedance Protected
CCW rotation, viewing from rear
3 in. body  Skeleton frame  1 in. x 3/8 in. shaft