Whitfield OEM 1 RPM Auger Motor (H5886) - CCW from rear

 The original Whitfield replacement OEM 1 RPM Auger Motor  (H5886) - CCW from rear. Motor tag states Model 4515UI-063 4515U1-063

Compatible models:

    • Whitfield Advantage I
    • Whitfield Advantage II
    • Whitfield Advantage II-T
    • Whitfield Advantage III
    • Whitfield Advantage II-T Classic
    • Whitfield Advantage Plus
    • Whitfield Legend
    • Whitfield Frontiersman
    • Whitfield Explorer
    • Whitfield Quest
    • Profile 20 FS - (P9)
    • Profile 20 FS-2 - (P9)
    • Profile 30 FS - (P10)
    • Profile 30 FS-2 - (P10)
    • Profile 30 INS - (P10)
    • Profile 30 INS-2 - (P10)
    • Optima 2 FS - (AO2)
    • Optima 3 FS - (AO2)
    • Optima 3 INS - (AO3)
    • Quest Plus FS - (WP4)
    • Quest Plus INS - (WP4)
    • T300P - (P11)
    • T301P - (P11)
    • T305P - (P11)
    • T308P - (P11)

The auger motor turns the auger, which transfers the pellets from the hopper to the burn pot. It feeds the fire and keeps the flame going. The auger motor must be replaced if it slows down or skips under a load (gears are stripped in the gear box when turning the auger.)  In older stove models the auger may stop when the stove gets hot. This may mean the auger motor needs replacing. Please consult a professional in your area to determine that this is the issue.

-----------------------------------------------------------------------------

115 Volts  60 Hz SP/Open  .48 Amp  1 RPM

Continuous duty, Impedance Protected
Counter clockwise rotation, viewing from rear
3 in. body  Skeleton frame  1 in. x 3/8 in. shaft

These Motors are set up for counter clockwise rotation (most pellet stoves use this setting) looking from rear. The rotation can be reversed if needed.