Englander PU-CB04 Control Panel & Circuit Board 25-PDV/ 25-PDVC/ TimberRidge/ 55-SHP10 (L)- PU-CB04-D- SE36985 ---MODEL/ MFG DATE/ PHONE REQUIRED

This Digital System Control Panel & Circuit Board Board PU-CB04 or PU-CB04-D for  25-PDV/ 25-PDVC/ TimberRidge/ 55-SHP10  and 55-SHP22L, 55-TRP15, 55-TRP22, American Heritage, US 25-5670 25-PI, 55-SHP20, 55-TRP20, 25-PAF, 55-SHP25, TRP25, 25-PDVP/55-SHP15 & TimberRidge pellet stove models manufactured after 2004 and before 2019. There are 9 heat settings on an Englander board. It is also used to adjust the intensity of the room fan. If you want to heat a large house or large room, adjusting the heat and room fan to higher setting helps direct the heat throughout the space. If you want to heat a smaller house or a single room, lowering the fan or heat settings limits the heat to that area and conserves energy. This is also where the on and off buttons are located on the pellet stove. 

The PU-CB04 for older 25-PDVC pellet Stoves have an Eprom Chip on the Back of the board that states Rev13 on the tag. They are Profile D boards.

For newer 25-PDVC Pellet Stoves with serial #s above 150,000 that meet the May2020 requirements require the new 25-PDVC control panel

Click here for the 25-PDVC New EPA certified Control Panel

Comes with new Heat Sensor and AC cord attached

Note: There is a sticker on the back inside that has CB-19 on it. That is not the part # of the control panel. The part # is PU-CB04

To program control board & process the order, the following is required. Please provide under "Add a note to your order" at checkout:

  • Stove's model (Example: 25-PDV)
  • Manufacturing date
  • Serial (Example: 003578) #
  • Phone #

These can be found on a metal plate on the back of your stove

For an Englander control panel for stoves manufactured before 2004, see the link below:

Englander Control Panel PU-CB98

For 25-EP, 55-SHPEP, 55-SHPEPL, 55-TRPEP models see below:

Englander Control Panel PU-CBEP

This control panel also fits the older
Orlander add on harvester which equates to the
Model 25-PAF

Therefore please put Model 25-PAF in the order note if you own this model pellet stove.