Convection (Room) Breckwell Blower A-E-33A - PP7310 (Non OEM)
This convection (room) blower A-E-33A is used on all Breckwell pellet and multi-fuel models except the P20, P28, and some older P2700's. Blower is 120 CFM.
Fits the following Pellet Stoves:
- Breckwell (Replaces Parts A-E-33 and A-E-33A) - Pellet Stove Models: P22 Maverick, P23 Sonora, P23I Sonora Insert, P24 Blazer, P24I Blazer Insert, P1000 Big E PWA/PCA, P2000 Tahoe, P2000I Tahoe Insert, P2700 Mojave, P4000 Classic Cast, P6000 Heartland, P7000 Solstice
Comes with high temperature silicone gasket.
The Convection Blower draws the room air in through the back of the stove into the heat exchanger and out the front. This creates the warm air that heats the house.
Note: If the stove was made in the early 90s and the convection blower has the large flange, then an adapter plate is needed to mount the new blower. See dimensions of the old and new blower flange holes and order adapter plate here. >> Adapter Plate for Older Breckwell Stoves