Breckwell Exhaust Blower (Draft or Combustion): Replaces A-E-027- 20051
Breckwell Exhaust Blower (Draft or Combustion). Replaces A-E-027- 20051. Aftermarket Part. The exhaust blower blows pellet dust up the venting draft blower and draws outside air into the firebox and across the heat exchange. The heat exchange warms the air that was drawn in and is essential for the production of hot air that heats your house. It is also known as a centrifugal blower or draft blower. This Quick Change motor has six screws/nuts for easy mounting and you do not have to remove the exhaust housing to install it except for some older stove models.
Fits the following Breckwell pellet stoves:
- Breckwell P20 Cadet
- Breckwell P22 Maverick
- Breckwell P22I Maverick Insert
- Breckwell P23 Sonora
- Breckwell P23I Sonora Insert
- Breckwell P24 Blazer
- Breckwell P24I Blazer Insert
- Breckwell P26 Cadet
- Breckwell P32i Cadet
- Breckwell P1000 Big E Home & Utility
- Breckwell P2000 Tahoe
- Breckwell P2000I Tahoe Insert
- Breckwell P2700 Mojave
- Breckwell P4000 Classic Cast or "Vermont"
- Breckwell P7000 Solstice
Specifications:
PP7600 Centrifugal Blower
75 CFM
115 Volts
.95 Amps
2800 RPM
Shaded Pole
3.3" Diameter Motor
Wheel size 4-3/4" x 1/2"
1 speed
2800 RPM @ free air
.95 amps @ free air
Note1: Fits Breckwell, Whitfield, Travis, Lopi, Country Flame, Glowboy, and Harman P2 many others, some simple modifications to this unit may be required for bolt up pattern.
Note2: Will fit stove models that have the 6” “Quick Change” style hub only
Note3:
For Breckwell stoves, the wire connections needed are one male spade clip and one female spade clip that will plug into the existing wire harness or just splice the wires in with a wire connector.
Note4:
For Travis Avalon and Lopi stoves, the wire connections needed are 2 male spade lugs that will plug into the existing wire harness or just splice the wires with a wire connector.
Cross References: Aladdin hearth 7021-10215 7021-10511 7021-10725, Aladdin Steel 7021-7856, American Energy 7021-8286, APR Industries 7021-10216, 7021-9081, Blowers 7021-8165, Burgess 7021-7908, Earth Stove (hearth trends), England Stove 7002-1942, 7021-9667, 7058-0225, Even Temp 7021-10327, Freeland Flame 7002-2411, Glo King 7021-8215, Grainger 7021-7290, Heathland (auton con) 7021-8129, Heat Tech Industries 7021-8855, National Steel 7021-7372, 7021-11027, 7058-0064, Pyro 7021-7757, Sherwood (enviro) 7021-7850, Travis 7021-7586, 7021-9037, 7021-9038, 7021-9778 U.S. Stove 7021-11358, Waterford Stove 7021-10309, 7021-8293, 7021-8030, 70218030 7021-8786, 7002-1942, 076002B England stove (note appears slightly different tab mount, have to reuse the discharge spout), 7021-9527 Earth stove (hearth trends)
For Breckwell stoves, the wire connections needed are one male spade clip and one female spade clip that will plug into the existing wire harness or just splice the wires in with a wire connector.