Ignitor- Hudson River West Point/Saranac replaces HRSP 114S - 6 in long- 2 male clips

This 300 watt 6" long 3/8 inch diameter ignitor (replaces HRSP 114S and SPSA 1012) comes with two male quick disconnect clips will fit Hudson River Saranac, West Point wood pellet stoves.

Note1: Run ignitor wire through air intake tube first, then crimp on clips.
Note2: The ignitor must be aligned by looking at it from the front of the stove
The ignitor must be in the center of the tube and recessed approx. 1/4" from the front edge of the tube.