Visit Our East Coast Hearth Parts Store
Pellet Stove Q & A Home
My Account
Login
Register
Forums
My stove is not doing this... What's wrong?
Latest Topics
Create topic
Sort: Oldest topic
Most recent activity
Newest topic
Oldest topic
Most viewed
Least viewed
Pellets smoldering after shut down
I have a king 5000 stove after shut down about 8 or 10 pellets fall into burn pot and smolder fil...
3
Stove goes into shut down
I have a Pelpro Bayview, it had a acutron 2 control board that recently went crazy, I’ve replaced...
2
England 25-puf completely dead
2006 model englander, was running fine and died suddenly. Replaced glass fuse and still won't pow...
3
Auger Not Turning
Evolution Pellet Stove Freestanding 25-EP 55-SHPEP 55-TRPEP Hi! The auger isn't turning, and I'm...
2
Santa Fe quadrafire insert
My insert is 18 years old and I have replaced blower snap discs and auger motor before to keep it...
5
Pleasant hearth pellet stove auger motor
Everything working fine then auger motor reverses wraps wires around and pulls plugs apart shutti...
1
Pleasant hearth pellet stove auger motor
Everything working fine then auger motor reverses wraps wires around and pulls plugs apart shutti...
2
Mon poile ne démarre pas
Quand je l’allume il injecte des granule et apprêt ça l’arête et la lumière 3 et 4 ce mère a fla...
2
Breckwell SP600 Stir pot motor
Installed new stir pot motor, turned stove on and motor runs continuously- even before starting t...
2
Vulcan V-150 control panel issues
The fan is the only function that is working right now. It's been cleaned and all parts have been...
2
Pelpro 130 Igniter wont turn off
I recently replaced my igniter, and noticed it wouldn't shut off once it ignited the pellets. It ...
1
Only 49 ac volts to auger motor.
Auger motor stopped during regular use, and will not come on at all any longer. Motor works fine...
2
Quadrafire cb 1200 smoke from exhaust outside
Have a 3 year old quad cb 1200 freestanding. Upon coming back from vacation the stove is constant...
4
Elledi fusion 8
No power, fuse and trip both ok, how to check if it is a faulty control board n100 or the display...
2
Kalor PAOLA 13D - Depress fault
Hi, Are there any experts familiar with the Kalor Paola 13D out there? My stove fails after 4-5...
3
Harmon XXV Distribution Fan
Hello. I replaced my exhaust fan because it kept shorting out the stove. I got the new one in pl...
2
Harman P68 Not Getting Enough Pellets
I have a 5 year old P68. Just recently the auger is not supplying enough pellets to sustain the ...
4
Some pellets are not falling into burn pot.
Why do some of the pellets fall out side the burn pot?
2
Blinking 3&4 at start ‼️ won't work... Ahhh
Ashley pellet stove USC ap5660.. it will start when you hit the button and then within 15 seconds...
3
Create topic
1
2
3