Visit Our East Coast Hearth Parts Store
Pellet Stove Q & A Home
My Account
Login
Register
Forums
My stove is not doing this... What's wrong?
Latest Topics
Create topic
Sort: Oldest topic
Most recent activity
Newest topic
Oldest topic
Most viewed
Least viewed
Need help diagnosing a problem with my stove
I'm having issues with my stove and am trying to figure out where to begin.
17
USS Ashley mod AP5600L ser CH19186-36
Error code E3 and E4 is it the control board ? and is there an upgrade with a remote thermostat ?
10
Help! My stove isn't working
So I did a deep clean on my Englander 10-CPM. Took the whole thing apart, and broke the fire bric...
3
Need help diagnosing a problem with my stove
Hi, i have a thelin providence pellet stove which runs great for 5-10 hours but during this time ...
5
Pellet pro everyting works as long as i hold the start button
I hold the start button on the acutron III control board and the everything flashes as long as i ...
54
Thelin Gnome Pellet Stove fan problem
I am having trouble with the fan in my Thelin Gnome pellet stove. The fan runs when the selector ...
8
Whitfield Advantage II is dead
I have a Whitfield advantage II pellet stove, the lady I got it from said the board was bad a few...
2
Magnum baby countryside not feeding corn
Hi. I have an issue. Stove won't feed during run cycle. Light fire and once it comes up to tem...
5
The auger doesn't turn on my Harman pellet stove.
I have a Harman pellet stove. My auger doesn't turn.
12
Napoleon TPS 35 Shut Down
I have a TPS 35 that I just had professionally cleaned. After the service the stove starts up ju...
2
Harman P68 combustion fan not clearing smoke out of stove?
Hi I have a Harman P68 stove about 6 years old. I love this thing but lately I've come home to s...
5
Serenity Castle ignites but auger stops
My stove starts up fine, but when it shifts from ignition mode to heat mode the auger stops feedi...
1
US STOVE 5660
Just ordered and installed a new control board in my stove. Side mount controls. As soon as I plu...
3
Napoleon NPS45 No Response
My Napoleon NPS45 is not looking alive at all. It was working fine one night - no issues at all....
1
Ravelli rv 80 locked out
I’m locked out of the menu on my stove. Stove runs but I can’t get into the menus.
2
Pellet Pro Glow Boy
Blower shuts down after stove runs for an hour or so.
2
KP130 king pellet stove
Help I'm changing the heat range settings and the blower motor is staying at the same speed
2
Golden eagle 5520
It will start until as it should go through 1st cycle and shut down. I have cleaned 3 times ,test...
2
Pellets backing up fill burn pot and start going up shoot
My cheap Charlie runs good for awhile then Pellets backing up fill burn pot and start going ...
3
Pellets backing up fill burn pot and start going up shoot
My cheap Charlie runs good for awhile then Pellets backing up fill burn pot and start going ...
6
My Honeywell thermostat does calls for heat, but my Whitfield Profile 20 control board clicks and will not start to feed pellets!
Please Help with clicking control Board.
2
TN40 Pellot stove
On the control panel on the top of the stove the button to make the fire go up does not work..
2
Hopper not emptying
Softwood pellets being used,seems like hopper not emptying all the way.Residue from pellets causi...
2
Pellet drop
If seems my stove does not drop pellet at regular times flame dies down to almost nothing before ...
2
Quadra Fire Santa Fe.......control box lights
Control box blue light came on when the auger energized.....now only one steady red over the fuze...
20
Fan rpm and ignition
Does anyone know if the combustion fan rpm and convection fan rpm need to be the same on and Adv...
2
Harmon Accentra Pellet Stove Wont Start
Good Morning, I have a Harmon Accentra Pellet stove that will shut off with no codes. If you tu...
4
USSC 5660 goes out
Stove seems to start fine, after a while, the fire goes out and the 1-2 error code appears. Trie...
20
US stove AP5660PE fuse alway blows 8 minutes after powering on
My AP5660PE fuse always blows 8 minutes after powering on. I used a clamp meter to test the amp o...
2
Breckwell Big E not responding to T-Stat
My Big E pellet stove has stopped responding to the thermostat. It works fine in manual mode. Whe...
3
Whitfield Advantage Plus exhaust air issue
Please check the following photos...new OEM Whitfield merkle augur motor installed. Collar nut i...
4
Cheap Charlie CC Franklin 120 motor won't run
My Cheap Charlie pellet stove motor wont run. I had an auger jam and cleared that but the motor w...
7
whitfield Traditiions won't shut off on its own.
Hello we have a whitfield traditions pellet stove we got in about 2001/2002. It runs ok but will ...
2
Whitfield Profile 30
Auger will not turn. Stove powers up, all lights on control board. Follow the start up instructio...
2
Whitfield stove
Started my stove up for the season it shuts down exactly every 30 minutes can't figure it out any...
2
qudrafiree 800 nova the ignitor is broken found replacemeant that looks like it ceramic one lights up but does not ignite pelletes up
hello
3
Heritage Bay by Lopi Fan not turning off
Turn off stove from manual to off, goes through shutdown process but fan that pushes heat into th...
2
USSC 6220 driving me nuts!
I am having the problem of my USSC 6220 pellet furnace shutting down with error code 2. This norm...
2
Harman Invincible Insert won't shut off
It starts and runs normally but when I turn the knob to off it just keeps feeding. It won't shut ...
2
Magnum 7500 question
I purchased a used magnum 7500 pellet furnace and the convection blower motor comes on for minute...
2
Create topic
1
2
3