Visit Our East Coast Hearth Parts Store
Pellet Stove Q & A Home
My Account
Login
Register
Forums
My stove is not doing this... What's wrong?
Latest Topics
Create topic
Sort: Most recent activity
Most recent activity
Newest topic
Oldest topic
Most viewed
Least viewed
Pellet drop
If seems my stove does not drop pellet at regular times flame dies down to almost nothing before ...
2
Ravelli rv 80 locked out
I’m locked out of the menu on my stove. Stove runs but I can’t get into the menus.
2
TN40 Pellot stove
On the control panel on the top of the stove the button to make the fire go up does not work..
2
Pellet Pro Glow Boy
Blower shuts down after stove runs for an hour or so.
2
KP130 king pellet stove
Help I'm changing the heat range settings and the blower motor is staying at the same speed
2
Golden eagle 5520
It will start until as it should go through 1st cycle and shut down. I have cleaned 3 times ,test...
2
Pellets backing up fill burn pot and start going up shoot
My cheap Charlie runs good for awhile then Pellets backing up fill burn pot and start going ...
3
My Honeywell thermostat does calls for heat, but my Whitfield Profile 20 control board clicks and will not start to feed pellets!
Please Help with clicking control Board.
2
Hopper not emptying
Softwood pellets being used,seems like hopper not emptying all the way.Residue from pellets causi...
2
Need help diagnosing a problem with my stove
I'm having issues with my stove and am trying to figure out where to begin.
17
US STOVE 5660
Just ordered and installed a new control board in my stove. Side mount controls. As soon as I plu...
3
Napoleon NPS45 No Response
My Napoleon NPS45 is not looking alive at all. It was working fine one night - no issues at all....
1
Serenity Castle ignites but auger stops
My stove starts up fine, but when it shifts from ignition mode to heat mode the auger stops feedi...
1
Napoleon TPS 35 Shut Down
I have a TPS 35 that I just had professionally cleaned. After the service the stove starts up ju...
2
Magnum baby countryside not feeding corn
Hi. I have an issue. Stove won't feed during run cycle. Light fire and once it comes up to tem...
5
Whitfield Advantage II is dead
I have a Whitfield advantage II pellet stove, the lady I got it from said the board was bad a few...
2
Need help diagnosing a problem with my stove
Hi, i have a thelin providence pellet stove which runs great for 5-10 hours but during this time ...
5
Pellet pro everyting works as long as i hold the start button
I hold the start button on the acutron III control board and the everything flashes as long as i ...
54
Help! My stove isn't working
So I did a deep clean on my Englander 10-CPM. Took the whole thing apart, and broke the fire bric...
3
Create topic
1
2
3